RF and microwave housing machining: a review checklist.
For a machined RF or microwave housing, the quotation needs more than an external size — channel geometry, partitions, cover interfaces, locating features and the specified finish all affect the manufacturing route.
Use the complete interface as the starting point
A cavity model shows geometry; the mating drawing reveals which relationships must work in assembly. Include the cover interface, locating features, fixing pattern and side connections. Mark critical datums and tolerances on the controlling drawing and state which file governs acceptance when interfaces span multiple documents.
Resolve channel geometry and tool access before quoting
Provide channel widths, depths, internal corners, thin-wall features and finish requirements. State explicitly if a corner radius or local feature may be modified — the approved drawing governs, and changes need agreement. A nominal external size does not convey access to narrow internal features.
Define the finishing and inspection stage
The published route runs datum preparation → cavity machining → holes and threads → deburring and cleaning → gold plating → inspection → protective packaging. Specify the plating spec, masking needs, and whether each controlled dimension applies before or after treatment. Coating requirements belong with the dimensional plan, not as a separate purchasing note.
Keep mechanical acceptance and RF validation distinct
CMM dimensional inspection and surface roughness checks support mechanical requirements only. They do not prove a specified RF response, leak rate, vacuum performance or cleanliness class. If those matter, name the method, acceptance criteria and required documentation in the RFQ.
Prepare the review package
| Information | Purpose |
|---|---|
| Housing / cover / locating datums | Connect cavity geometry to the mating interface |
| Critical channel widths, depths, finish | Review tool access and controlled features |
| Plating spec and acceptance stage | Agree which surfaces and dimensions are checked after finishing |
| RF / leak / application testing | Confirm a separate scope beyond dimensional inspection |