NEXUS Send drawings
MANUFACTURING GUIDE / 04

Thin-wall cover machining: flatness and DFM.

A thin-wall cover drawing should define the mating surface, datum system and inspection condition as clearly as the overall geometry. Published case: 6061-T651, 426 × 221 × 36 mm, flatness ≤ 0.05 mm.

Before you send the RFQ

  • Send matching 2D and 3D revisions together
  • Identify the surface controlled for flatness
  • State whether inspection happens free-state or restrained
  • Define which contact areas must stay conductive after finishing

Start with the functional mating surface

A cover can hit every overall dimension and still fail at the mating interface. Flag the sealing or contact face on the drawing, tie the flatness callout to the relevant datums and acceptance conditions, and mark contact lands explicitly — never let the shop infer them from the model.

Connect workholding to the inspection condition

The published route runs rough machining → stress relief → finish milling with temporary supports. A part held during cutting may behave differently once released — share the intended assembly condition and ask how features will be verified. Never let an unstated clamped condition substitute for a drawing requirement.

Plan conductive surfaces before finishing

The finishing stack — conversion coating, masking, painting, screen printing — is where conductive contact areas get protected or destroyed. Contact areas and coating boundaries belong in the technical package. Contact-resistance and coating checks are order-specific; new projects get their own scope.

What to send for a similar part

  • Current model and drawing, material and temper (the case: 6061-T651)
  • Mating-face requirements and hole-array callouts
  • Finishing and masking notes, with protected contact areas marked
  • The critical inspection condition and the required report format

Flatness ≤ 0.05 mm applied to that published project — not a universal flatness guarantee for every cover, size or material.

START WITH YOUR DRAWING

Turn the guide into a quotation.

Chat on WhatsApp