NEXUS Send drawings
PRODUCT FAMILY / FLANGES & END COVERS

Flanges & End Covers.

Mating and enclosure components where assembly interfaces, flatness and feature positions need to work together — reviewed as a system, not as separate dimensions. Includes EMI shielding covers for electronic equipment.

01

Typical feature types

  • Locating and mounting flanges
  • End covers and electronic enclosure covers
  • Ventilation arrays, openings and fixing holes
02

Engineering review before production

  • Mating surfaces and critical datums
  • Thin-wall distortion and workholding
  • Conductive surfaces, coating and masking requirements
03

Confirmed per project

Materials, finish, tolerances and inspection methods are confirmed per project — the published case is representative, not a universal capability limit.

The case behind this family

Thin-Wall EMI Shielding Enclosure Cover — a custom EMI shielding cover with ventilation-hole arrays, mounting holes and openings for electronic equipment. 6061-T651 aluminium, conductive conversion coating, 426 × 221 × 36 mm, flatness ≤ 0.05 mm on the mating face. Read the full route in the case study.

COMMON QUESTIONS

Asked on this family.

Which cover does the published case show?
A thin-wall electronic enclosure cover in 6061-T651 aluminium with ventilation arrays and conductive contact surfaces — one example within the family, not a template.
Does ≤ 0.05 mm flatness apply to every cover?
No — it applied to that specific project. Flatness is specified per drawing with controlled surfaces, datums and inspection conditions stated.
What finishing information does an RFQ need?
Coating and masking requirements, conductive contact areas, painting or marking needs, acceptance criteria, and mating-part details where relevant.
START WITH YOUR DRAWING

Have a similar part?

Chat on WhatsApp