NEXUS Send drawings
MACHINING CASE / 01

RF & Microwave Housing.

A custom-machined cavity housing for RF and microwave assemblies, combining internal channels, thin partitions, locating features and threaded interfaces.

MATERIAL
Brass substrate
FINISH / PROCESS
Gold-plated finish
REPRESENTATIVE SIZE
108 × 86 × 16 mm
RF & Microwave Housing — machined part
Representative component — NEXUS capability profile REV 23, p.5
01

Machining challenges

Narrow, deep internal channels constrain tool access and drive deflection. Thin partitions need deformation control. Channel-wall finish, cover mating surfaces and locating-hole relationships all have to stay consistent — mechanical performance depends on them, even though they never appear in an electrical test.
MANUFACTURING ROUTE
STEP 01

Blank preparation and datum machining

STEP 02

Cavity and partition milling

STEP 03

Cover-fixing holes, locating holes, side-interface threads

STEP 04

Deburring and cleaning

STEP 05

Gold plating

STEP 06

Inspection

STEP 07

Protective packaging

KEY CONTROL POINTS
—

What the route watches

  • Channel width and depth
  • Internal surface finish
  • Mating-face flatness
  • Assembly parallelism
  • Locating-hole position
  • Pre-plating surface condition and coating quality
DIMENSIONAL & SURFACE INSPECTION
—

How it gets verified

  • CMM dimensional inspection of channels, mating faces and locating features
  • Surface roughness checks on channel walls
  • Dimensional inspection does not prove RF performance or leak tightness — application testing is scoped separately when required

The requirements and manufacturing route shown here apply to this project. New components are reviewed against their own drawings and agreed specifications — published values are project-specific requirements, not general capability limits.

START WITH YOUR DRAWING

Have a similar project?

Chat on WhatsApp